WHITE PINE LOG PRICE LIST
{Prices are subject to change without notice}

                                  LOG BUYERS   

               Greg Chase   802 299-6835

               Doug Britton  802 333-8115, 800 343-5300, 802 649-1873 Evenings

                                                  dbritton@brittonlumber.com

Updated: 4/08/2020

                                                  Specifications

 # 1A      - 12" & up top end, 16' long

               -Very high quality logs.

              - Maximum knot sizes:  1" red or black (black knots must be sound).

              - Good growth spacing (18" & up) between the knot whorls.

              - Logs must be straight with no rot, sweep, shake, weevil or machine

                      damage.

 # 1        ‑ 10" & up, 16' long, (A low % of 12’ & 14’) 12" + top end on 12' logs

              ‑ High quality logs.

              - Excessive footage (over 10%) of 14’ or 12' logs will be downgraded to # 2.

              - Maximum knot sizes: 3" red, 2" black (black knots must be sound).

              ‑  Logs must be straight with no rot, sweep, shake, weevil or machine

                      damage.

 # 2        ‑ 8" & up top end, 12', 14' & 16' long, (Occasional high quality 8’ log) 

              - Good to average quality logs.    

              - Maximum knot size: 4"

              ‑ Small amounts of red rot, sweep, weevil damage and other defects allowed.

 # 3        ‑ 8” & up, 8’ – 16’ (very few 10’ or 14’)

              ‑ Low quality due to oversized knots, excessive sweep, weevil damage, red rot,   

                stain, rot or other defects.

              - Maximum knot size 6"    

              - Any 8' & 10' logs - must meet # 2 knot & defect specs.

 Cull       ‑ Logs not meeting the minimum specifications and the general rules for all logs.

              ‑ Any log under 8" top end, or under 8' 6" long.

              ‑ Logs with excessive defects or with detectable hardware.

              ‑ Logs too large, crooked or muddy to process.

              - Any logs which have stain or are not fresh cut.  

              - Cull logs must be picked up within 1 week, we do not have room to store them.

    *         - Loads must not exceed 5% (in b.f.) of # 3.  We would prefer to buy none. 

---------------------------------- General Rules For All Logs ----------------------------------

• All logs must be cut at least 6" over in length. Odd length logs are very time consuming to scale.
• Maximum length allowed:  16' 10"!!  17' is too long!
• Maximum diameter allowed:  36" butt.  Flair on large logs must be trimmed off.
• All logs must be fresh cut.
• Scale will be deducted for rot, sweep, weevil damage and other defects.
• Scale will be deducted for damage to the log from processors or handling (machine damage).
• We will refuse logs with excessive processor damage.
• Cull logs not picked up after 1 week, become the property of the mill.     
• Scale is international rule.
• Prices and specifications may change without notice.    
• Loads must contain a high percentage (over 50%) of # 1 & 1A grade logs. 
• Limbs must be trimmed flush to the log.
• Yard hours: 6:00 ‑ 5:00 Monday ‑ Friday.  Our log loader is not available Friday afternoons.
• The log week ends Wed. at noon.  Checks are available Friday am & are mailed Friday at 4 p.m.
• Unload all logs with the butt ends on the same side.

800 343-5300